4 1/2 O.D. Steel Pipe Swing Hanger
This swing hanger is 4 1/2” O.D. with a 14.1” circumference.
Sold as each.
This swing hanger is 4 1/2” O.D. with a 14.1” circumference. It has a .51 ID oil light bearing and axle bolt with lock tight nut and accepts a 12mm bolt. The stamped steel has more ability to bend so they will not snap when torqued too tightly. The lower half of the swing hanger body has a figure eight pendulum with a sintered bronze bearing incorporated into it, to reduce wear. The bronze is impregnated with oil so the bearings do not have to be oiled. The pendulum is 1” wide and is a completely closed figure eight so that the connecting S-hook or shackle cannot be dislodged from the hanger. The two halves of the hanger are bolted together with a 12mm carriage bolt with a hex lock tight nut. The pendulum is held to the hanger with a #12 axle bolt with a long shoulder so the bearing does not ride on the threads. It also has a lock tight nut. Do not torque more than 25ft-lbs. when installing.
Sold as each.
These shackles take the place of S-hooks.
This is a replacement steel 12mm Bolt & Nut to be used in both ductile iron and stamped steel hangers.
Includes 2 quick clips with spring action gate for easy removing and adding of swing accessories.
Immediate same day free shipping, receive next day in many areas.
Hardware pack for attaching one pair of ductile swing hangers on a wooden beam.
Available in three different sizes (e.g., 4′ x 4″, 4′ x 6″, or 4″ x 10″).
Immediate same day shipping, receive next day in many areas.